If you’ve been driving your car for a while, it’s probably time to give it a good cleaning. But instead of spending hours scrubbing the dirt and grime off of it by hand, you can use a pressure washer to get the job done in minutes. In this blog post, we’ll show you how to wash a car with a pressure washer safely and effectively. So read on to learn more!
What you will need to follow this tutorial?
Here is a list of things you will need to clean your car with pressure washer:
1. Car Pressure Washer:
The best pressure washers for car washing are electric models because they have more power and can handle lighter jobs better. For safe use, owners should set their PSI at 1200-1900 with an appropriate GPM between 1.4 -1 .6 gallons per minute depending on the type of vehicle being cleaned (medium or heavy duty).
2. 25-Degree Nozzle, 40-Degree Nozzle, and Soap Nozzle:
You will need these three different nozzles to properly pressure wash your car. The 25-degree nozzle is for general cleaning, the 40-degree nozzle is for more delicate areas, and the soap nozzle is for applying soap or detergent.
3. Pressure Washer Soap:
You will need a pressure washer soap that is specifically designed for use with pressure washers. Do not use regular dish soap because it will damage the paint on your car.
4. Cloth:
You will need a soft cloth to wipe away any soap residue after you pressure wash your car.
5. Foam Cannon:
Nowadays, there are many ways to wash our cars without leaving behind scratches. One way you can use if the pressure washer doesn’t have a detergent tank and just attach it onto its wand is by using foam cannons instead! Foam Cannons work well with any type of machine so get yours today before they’re gone for good!.
6. Two Buckets of Water:
One bucket will be for soap and water, and the other bucket will be for clean water to rinse your car off with.
7. Microfiber Wash Mitt:
You will need a microfiber wash mitt to wash your car without scratching the paint.
8. Microfiber Towel:
You will need a microfiber towel to dry your car after you wash it.
How to wash a car with a pressure washer?
Now that you have gathered all the necessary materials, it is time to start pressure washing your car! Follow these steps to get started:
1. Choose the appropriate pressure washer and nozzle:
When washing your car, make sure you use an appropriate pressure washer with the right power and water flow. The higher PSI (pounds per square inch),the More force will be released from this machine’s tip as it leaves behind dirt on top of concrete or metal surface just like how we want our housekeeping efforts delivered; however too little can leave small particles caught up in cracks which could lead to bigger problems later down.
Choose a pressure washer with the appropriate pressure level.
If you have a light-duty car, use a pressure washer with 1200 to 1900 PSI. If you have a heavy-duty car, use a pressure washer with 3000 PSI.
Choose the appropriate nozzles.
For general cleaning, use a 25-degree nozzle. For more delicate areas, use a 40-degree nozzle.
2. Park car in a good spot for washing
You will want to park your car in a spot where you can easily reach all sides of it with the pressure washer. If you have a driveway, parking your car in the middle of it is a good idea.
3. Rinse your car
Make sure to rinse your car before you pressure wash it, because the dirt and grime from doing this type of work can get into all sorts of places. Make a gush with water at least 4-5 feet away from where ever you are working on so that any chemicals in contact don’t end up ruining anything inside!
For best results, make sure to keep your car’s surface clean by following these simple steps. First of all you will need a pressure washer and an outlet for it near where you’re working or in close proximity with other power sources so that there is no gap between them when operating at full capacity (which could cause flooding). Next attach 25 degree tip onto garden gun depending on what kind which comes equipped within vehicle-then turn machine On!). Wet entire body using stream from nozzle until nearly dry before moving onto next section.
>>> Here are the best electric pressure washer for cars recommend for you.
4. Apply detergent to your car
– Pour detergent and water into the bucket to dilute the detergent concentrate with water:
For general cleaning, mix 1 ounce of detergent concentrate with 1 gallon of water.
or heavy duty cleaning, mix 2 ounces of detergent concentrate with 1 gallon of water.
– Fill the detergent tank of the pressure washer with the diluted detergent:
For general cleaning, use the low pressure setting on the pressure washer.
For heavy duty cleaning, use the high pressure setting on the pressure washer.
– Spray the detergent onto your car:
For general cleaning, hold the nozzle about 6 inches from the surface of your car.
For heavy duty cleaning, hold the nozzle about 3 inches from the surface of your car.
Make sure to evenly coat the entire vehicle.
5. Rinse detergent off of the car
To rinse your car off effectively, follow these 3 steps:
1) Switch the tip to a 40-degree angle so that water can flow through more easily and remove any leftover soap residue from previous drives.
2) Use an output method not associated with detergents such as straight or circular motions using either pipes/hoses attached directly on top of washing machine’s spout OR simply connect them into its drain line if it has one already; this will allow you access while driving without having someone else drive around neighborhoods fussing over parking spaces!
3.) RINSE!!!
>>>Related: Safe psi for car washing
Frequently Asked Questions
How much PSI should a pressure washer have for washing a car?
If you have a light-duty car, use a pressure washer with 1200 to 1900 PSI. If you have a heavy-duty car, use a pressure washer with 3000 PSI.
What is the best nozzle to use for washing a car?
For general cleaning, use a 25-degree nozzle. For more delicate areas, use a 40-degree nozzle.
Can I use bleach in my pressure washer to clean my car?
No, you should not use bleach in your pressure washer to clean your car. Bleach is a corrosive material and can damage the paint on your car.
Is it better to wash a car with a hose or a pressure washer?
A pressure washer is better than a hose because it will remove more dirt and grime from your car. It is also less likely to damage the paint on your car.
Does pressure washing hurt car paint?
No, pressure washing does not hurt car paint. However, if you use a high-pressure setting on your pressure washer, it can damage the clear coat on your car.
Final Words
A pressure washer is a great investment for anyone who wants to keep their car looking clean and new. Answer The Question hope this post was helpful in showing you how to wash a car with a pressure washer. Be sure to check out our other posts for more tips and tricks on how to get the most out of your pressure washer!
