Steering wheel covers are a great way to keep your hands warm while driving in the winter, and they can also add a touch of personality to your car. In this article, we will show you how to put on a steering wheel cover. We will also provide some tips on choosing the right cover for your car.
Why Would You Need A Steering Wheel Cover?
There are several reasons why you might want to add a steering wheel cover to your car. In the winter, a steering wheel cover can keep your hands warm while you drive. In the summer, a cover can protect your hands from the sun’s rays. If you have young children, a steering wheel cover can also help protect them from sharp edges on the wheel.
How To Choose A Steering Wheel Cover?
When choosing a steering wheel cover, you should consider the following factors:
-Size: Steering wheel covers come in a variety of sizes. You will need to measure your steering wheel to determine the size that you need.
-Material: Steering wheel covers are made from a variety of materials, including leather, cloth, and silicone. You should choose a material that is comfortable to grip and that will not slip on the wheel.
-Color: Steering wheel covers come in a variety of colors. You can choose a color that matches your car’s interior or one that stands out.
How To Put On A Steering Wheel Cover
Putting on a steering wheel cover is relatively easy. Here are the steps that you will need to follow:
1. Set The Steering Wheel Straight And Clean It
Straighten the steering wheel (12 o’clock position) before starting.
Of course, it can be rotated any way you like, but if you spin the wheel this way, the next step will be much easier.
After that, clean the handle part of the wheel (where your hands are).
You can use a clean cloth or paper towel, but wet wipes are a good option.
Cleaning is necessary because over time a thin, smooth layer of dirt and grease develops on the gripping surface.
If left, it can cause the steering wheel cover to lose adhesion and slip even while driving, which is very dangerous.
Clean it as thoroughly as possible.
>>>> how to steering wheel cleaning?
2. Align The Cover With The Steering Wheel
With the steering wheel in the 12 o’clock position, take the cover and place it on top of the wheel so that the holes for the spokes are aligned.
If everything is done correctly, you should be able to see all four (or five) holes.
At this stage, the cover may not sit snugly against the wheel, and that’s okay.
3. Slip The Top Of The Cover Over The Top Of The Steering Wheel
Now take the top part of the cover (the part that will be on top of the wheel when driving) and slip it over the top of the steering wheel.
4. Slide The Cover Bit By Bit Into Place
Once covered on the wheel, it will appear smaller even if you buy the right size.
Don’t worry, it’s normal and it should be. As mentioned before, it needs to be very comfortable for safety reasons.
Most people will immediately try to stretch the cover from top to bottom and place it that way. If you do, you’ll find it almost impossible not to mention the fact that you can damage the cover this way.
If you want to learn how to install a steering wheel cover, you need to be patient.
It’s best to start on one side. Hold the cover section on top of the steering wheel with one hand.
With the other hand, slowly and carefully pull the lid onto the wheel piece by piece.
You should be able to reach and complete almost half of the steering wheel on one side.
When you’re done, switch hands and do the other side.
Again, hold the top with one hand and slide the lid into place piece by piece with the other.
5. Check That The Steering Wheel Cover Is Firmly In Place
Now that you’ve finished installing the cover, give it a good tug to make sure it’s firmly in place.
The steering wheel cover should not move. If it does, repeat steps 4 and 5.
6. Trim The Excess Material (If Necessary)
If you followed all of the instructions, there should be no excess material.
But if you find that there is some, simply take a sharp knife or scissors and cut off the excess along the edge of the steering wheel.
How To Make A Steering Wheel Cover Fit Tighter
The process of installing a steering wheel cover is not difficult. But sometimes you may find that the cover is too big or does not fit snugly against the wheel.
Don’t worry, this can be easily fixed with a few simple steps:
1. Wet The Cover With Water
The first step is to wet the cover with water. You can use a spray bottle or simply dip the cover in a bowl of water.
2. Place The Cover On The Steering Wheel And Wait For It To Dry
After wetting the cover, place it on the steering wheel and wait for it to dry.
As the cover dries, it will shrink and become tighter.
3. Repeat Steps 1 And 2 If Necessary
If the cover is still too loose, repeat steps 1 and 2.
4. Trim The Excess Material (If Necessary)
If you find that there is still some excess material, simply take a sharp knife or scissors and cut off the excess along the edge of the steering wheel.
>>> More: How to clean a sticky steering wheel
How To Remove A Steering Wheel Cover
Removing a steering wheel cover is just as easy as installing one.
1. Start By Removing The Top Part Of The Cover
To remove the cover, start by removing the top part of the cover.
2. Slowly And Carefully Peel The Cover Off The Wheel
Once the top part is removed, slowly and carefully peel the rest of the cover off the wheel.
3. Remove Any Excess Material
If there is any excess material left on the steering wheel, simply take a sharp knife or scissors and cut it off.
4. Wash The Steering Wheel And Cover
Once the steering wheel is clean, wash the cover in soapy water.
5. Let The Cover Dry Completely Before Reinstalling
After washing the cover, let it dry completely before reinstalling it.
FAQs About Install Steering Wheel Cover
What Equipment Do I Need To Install A Faux Fur Steering Wheel Cover?
To install a faux fur steering wheel cover, you will need the following items:
– A measuring tape
– A sharp knife or scissors
– A spray bottle or bowl of water
– A Steering wheel cover
How Do I Make Sure The Steering Wheel Cover Is The Right Size?
To make sure the steering wheel cover is the right size, measure the diameter of your steering wheel with a measuring tape.
Most covers are designed to fit steering wheels that are 14.5 inches to 15.5 inches in diameter.
How Much Time Does Install Steering Wheel Cover Take?
The process of installing a steering wheel cover should take no more than 15 minutes.
What’s The Easiest Way To Put On A Steering Wheel Cover?
The easiest way to put on a steering wheel cover is to wet the cover with water.
You can use a spray bottle or simply dip the cover in a bowl of water.
After wetting the cover, place it on the steering wheel and wait for it to dry.
As the cover dries, it will shrink and become tighter.
Why Are Steering Wheel Covers So Hard To Put On?
Steering wheel covers can be difficult to put on because they are often too big or do not fit snugly against the wheel.
Conclusion
Answer The Question hope this blog post helped you in your quest to put a steering wheel cover on. If it didn’t, let us know so we can improve our content. We want to make sure that all of our readers are able to successfully put a steering wheel cover on by following our simple steps. Thank you for reading and good luck!
