Subaru engines are known for being reliable and long lasting. Many people attribute this to the boxer engine design, which is inherently balanced. However, one of the areas that can cause problems with these cars is the oil temperature. In this post, we’ll take a look at what AT oil temp Subaru means, the causes and symptoms of high or low oil temps, and how to fix it if needed.
At Oil Temp Light Subaru Meaning
The oil temperature light on your Subaru is there to warn you when the engine oil temperature gets too high. This can be caused by a number of things, such as excessive idling, driving in stop-and-go traffic, or even operating the engine at high speeds for extended periods of time.
If the light comes on, it’s important to take action immediately to avoid damaging the engine. The first thing you should do is pull over and turn off the engine. Allow it to cool down for a few minutes before checking the oil level. If it’s low, add more oil until it reaches the full mark on the dipstick.
Causes Of At Oil Temp Subaru
There are a few different things that can cause the oil temp light to come on in your Subaru:
Low Transmission Fluid
Monitoring and maintaining the proper transmission fluid level is critical to the longevity and performance of a Subaru vehicle. If the fluid level is low, the temperature of the transmission system can increase, potentially leading to damage. One of the first signs that there is a rise in fluid temperature is when the “At Oil Temp” warning light appears on the dashboard.
If this happens, it’s important to pull over and check the transmission fluid level as soon as possible. By taking quick action, you can help prevent serious damage to your vehicle’s transmission system.
Bad Transmission Fluid Usage
If you’re using the wrong type of transmission fluid in your Subaru, it can cause a number of problems. The wrong fluid can lead to poor shifting, increased wear and tear, and even transmission failure. In some cases, it can also cause the “At Oil Temp” warning light to come on.
To avoid this problem, be sure to use the type of transmission fluid specified in your owner’s manual. If you’re unsure which type to use, consult with a qualified mechanic or dealership service department.
At Oil Temp Subaru Symptoms
If the oil temperature in your Subaru gets too high, it can cause a number of problems.
Constant Flashing Warning Light
As any car owner knows, the dashboard is your vehicle’s control center. All the vital information about your car’s performance is displayed here, from the current speed to the amount of fuel remaining. However, interpreting all this data can be daunting, especially if you’re not familiar with all the symbols and lights. One light that you should always be aware of is the oil temperature warning light.
This light will come on when the engine oil is too hot, and if it is ignored, it can lead to serious engine damage. So if you see this light flickering on your dashboard, pull over and let your car cool down as soon as possible. By being aware of your car’s warning lights, you can avoid expensive repairs and keep your vehicle running smoothly for years to come.
Transmission Failure
If the oil temperature in your Subaru gets too high, it can cause the transmission to fail. This is because the transmission fluid acts as a coolant for the transmission system, and if it gets too hot, it can break down and cause serious damage.
If your car’s transmission fails, it will need to be replaced, which can be a very expensive repair. To avoid this, be sure to check the transmission fluid level regularly and top it off if necessary. You should also have the transmission system serviced according to the schedule in your owner’s manual.
>> Related:
Fixing At Oil Temp Warning Light
If the “At Oil Temp” warning light comes on in your Subaru, it’s important to take action immediately. The first thing you should do is pull over and turn off the engine. Allow it to cool down for a few minutes before checking the oil level. If it’s low, add more oil until it reaches the full mark on the dipstick.
If the oil level is good, the next step is to check the transmission fluid. If it’s low, add more until it reaches the proper level. If the transmission fluid is good, then you may need to have your vehicle’s transmission system serviced.
By taking quick action when the “At Oil Temp” warning light comes on, you can help prevent serious damage to your vehicle’s transmission system.
If you’re unsure of what to do, consult with a qualified mechanic or dealership service department. They will be able to diagnose the problem and recommend the best course of action.
Can I Drive With At Oil Temp Light Flashing?
If the “At Oil Temp” light is flashing on your Subaru, it’s important to take action immediately. The first thing you should do is pull over and turn off the engine. Allow it to cool down for a few minutes before checking the oil level. If it’s low, add more oil until it reaches the full mark on the dipstick.
How Much Does It Cost To Repair Subaru Transmission?
The Subaru powertrain is one of the most expensive and finicky parts of the vehicle. A simple transmission change can cost $200, but that’s just one potential repair expense. In order to determine the actual cost of repairs, you need to know what’s wrong with the vehicle; however, most repairs will start at $1,000, with an average cost of around $2,000. A complete transmission refurbishment or replacement is likely to cost as much as $3,500.
To avoid this costly repair, be sure to check the transmission fluid level regularly and top it off if necessary. You should also have the transmission system serviced according to the schedule in your owner’s manual.
By taking these simple steps, you can help prevent serious damage to your vehicle’s transmission system and avoid a costly repair bill.
FAQs About At Oil Temp Subaru
Can I Drive With The Transmission Temp Light On?
If the transmission temperature light is on, it’s important to take action immediately. The first thing you should do is pull over and turn off the engine. Allow it to cool down for a few minutes before checking the oil level. If it’s low, add more oil until it reaches the full mark on the dipstick.
Does Subaru Have An Oil Change Light?
Yes, Subaru has an oil change light. This light comes on when it’s time to change the oil. Be sure to follow the schedule in your owner’s manual to ensure that your vehicle’s oil is changed at the proper interval.
What Is The Average Oil Temperature In A Car?
The average oil temperature in a car is around 190 degrees Fahrenheit. However, this can vary depending on the make and model of the vehicle.
Final Words
The engine oil is vital for the smooth running of a vehicle. It lubricates the moving parts and helps to keep them cool by transferring heat away from the engine. Subaru engines are known to be high performance and this puts extra demands on the oil. As well as ensuring your car has sufficient levels of oil, it’s also important that you use the correct grade of oil for your car. In this article, we have looked at what motor oil is, how it works, what causes it to become dirty and how to fix this problem. Let Answer The Question know in the comments below if there are any other aspects of motor oil that you would like us to cover.
